Pay in installments of $14.63 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 17 - Jul 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ANTEC P20CE Case, E-ATX Gaming, White, Mid Tower, 2 x USB 3.0 / Type-C 3.2 Gen 2 x 1, E-ATX, ATX, Micro-ATX, ITXAntec P20E Gaming Case Simple Assembly & Superior Cooling Antec Performance Series P20C White adopts a unique metal design, providing a massive airflow path. With the full size dust filter, the P20C White can reach the balance between cooling and dust prevention. The pin type metal front panel is effortlessly removable, and the clip on dust filter makes cleaning easy. The well designed styling will give you a remarkable PC showcase. Full Size Clip On
Antec P20E Gaming CaseSimple Assembly & Superior Cooling
Antec Performance Series P20C White adopts a unique metal design, providing a massive airflow path. With the full-size dust filter, the P20C White can reach the balance between cooling and dust prevention. The pin-type metal front panel is effortlessly removable, and the clip-on dust filter makes cleaning easy. The well-designed styling will give you a remarkable PC showcase.
Full-Size Clip-On Dust Filter at the Front
Magnetic Dust Filter at the Top
Pull-Out Dust Filter at the Bottom
3 x 120mm PWM Fans Included
Pre-installed fans at the front provide massive airflow, and the PWM function can easily reach the balance between cooling and silence.
The included 1 to 4 fan splitter cable makes cable management easy.
Type-C 3.2 Gen 2 Ready
Built-in Type-C 3.2 Gen 2 port provides transfer speeds up to 10 Gbps.
Power
Reset
HD-AUDIO
MIC
USB 3.0 *2
Type-C 3.2 Gen 2
High flexibility for Expansion
Features an extensive interior and powerful compatibility. Supports 2 x 360mm radiators at the front and the top simultaneously.
Supports Vertical GPU Installation
Ready to provide users with a more flexible layout through the 7 reusable PCI-E slots for vertical GPU installation.
Dual CPU Motherboard Support
Supports dual CPU motherboards with a width of up to 330mm, reflecting the upgrade and evolution of compatibility.
Building a Clean PC Is Within Easy Reach
Well-designed cable routing makes wiring easy and simple. The cable channels with a cutout on top for stable routing.
9 Fans Simultaneously
3 x 120mm fans and a 360mm radiator can be installed inside the interior at the front. Plus 3 x 120mm fans outside the interior for outstanding cooling. Supports up to 9 x 120mm fans & 360mm radiators at the front and top simultaneously.
Easy Installation
Fits up to 4 drive devices. 2 HDD & SSD compatible hard drive bays; 2 SSD hard drive bays.
Snap-in 2.5" drive device for easy mounting.
Removable hard drive cage.
Tool-free 3.5" drive tray.
Features
1. Featuring a large metal perforation design and a full-face dust filter, it maintains a large airflow while effectively preventing dust accumulation
2.4mm panoramic side glass panel, capable of displaying components.
3. Supports dual-CPU E-ATX (maximum length 330mm) motherboards, increasing the variety of motherboard options.
4. The top and front sections can simultaneously support 360mm water cooling radiators, with a minimum length of 403mm for both.
5.Includes a fan 1 to 4-point cable for easy cable management.
6.The front panel comes standard with three 120mm PWM white-framed, white-blade fans, which effectively regulate CPU temperature and fan speed, and significantly reduce fan noise.
7. The power supply uses a rear-insertion design and comes with two anti-slip pads for easy plugging and unplugging.
8.The power supply compartment features a honeycomb-style vent design, allowing for easy installation of two 120mm fans to accelerate graphics card cooling.
9. The back of the side panel uses lock-on screws, which will remain attached to the side panel even after the screws are loosened, so there's no need to worry about the screws being lost after removal.
10. Seven reusable PCIe brackets, fully compatible with most commercially available vertical adapters.
11. Seven reusable PCIe brackets, fully compatible with most commercially available vertical adapters.
12. Includes 8 white cable guides (tethering rubber rings) + 3 extra cable ties
13.White magnetic dust filter at the top + white plastic snap-on dust filter at the front + white pull-out plastic filter at the bottom
14.Removable 3.5” HDD Holder
15. Includes a white graphics card bracket, which allows for adjustment of the graphics card's support position to prevent deformation and damage caused by the graphics card sagging.
Specifications
Case Specification
Dimensions469 x 220 x 490mm (DWH)
Form FactorMid Tower
MaterialsSteel + Plastic
Mainboard SupportE-ATX, ATX, Micro-ATX, ITX
Front Access & ControlsPower, Reset , USB 3.0 x 2, Type-C 3.2 Gen 2 x 1, MIC x 1, HD-AUDIO x 1
Side Panel4 MM Tempered Glass Side Panel
Drive Bays
Expansion Slots7
3.5" /2.5"2/2
2.5"2
Fan
Front3 x 120mm / 3 x 140mm
Top 3 x 120mm / 2 x 140mm
Power Supply Shroud 2 x 120mm
Rear1 x 120mm
Included Fan(s)Pre-installed 3 x 120mm PWM fans in front (P20C White)
Radiator Support
Front120 / 140 / 240 / 280 / 360mm
Top120 / 140 / 240 / 280 / 360mm
Rear120mm
Clearance
Max GPU Length= 375mm
Max CPU Cooler Height= 170mm
Max PSU Length(Include cable) = 205mm(with HDD)
(Include cable) = 410mm(without HDD)
Miscellaneous
Dust FilterFront / Top / Bottom
Net Weight8.1 Kg(P20C White) / 8.3 Kg(P20C White Elite)
Gross Weight9.32 Kg(P20C White) / 9.52 Kg(P20C White Elite)
Warranty2 Years
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes.
It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
recommand products
WAVE GEL MOOD CHANGE WM098 LOVE BERRY
10.00
Sakura Tissue-Tek TEC 5 Embedding Station & Cryo Plate
5748.50
A3-60-8008 Noise Filter (USED) - Sakura TEC 5, VIP 5, Express x120
88.95
Sakura Tissue-Tek Prisma 6130 & Glas g2 6500 Slide Stainer Glass Coverslipper Workstation
30000.00
WAVEGEL MATCHING (#190) W190 NETHERLANDS NIGHTS
10.00