SKU: 80056442933

Modulus-86

Sale price$80.10 Regular price$89.00
Save 10%

Pay in installments of $22.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Modulus-86The Modulus 86 Rev. 3. 0 is a 60 W composite amplifier which uses error correction to provide world class performance. It requires no adjustments and is built using off the shelf parts. The Unpopulated PCB Option of the Modulus 86 has been discontinued. Instead I will focus on kits: Modulus 86 Stereo Kit and Modulus 86 10th Anniversary Stereo Kit. Technical Documentation Data SheetDesign Documentation Description Key Specifications Circuit Topology

The Modulus-86 Rev. 3.0 is a 60 W composite amplifier which uses error correction to provide world class performance. It requires no adjustments and is built using off-the-shelf parts.

The Unpopulated PCB Option of the Modulus-86 has been discontinued. Instead I will focus on kits: Modulus-86 Stereo Kit and Modulus-86 10th Anniversary Stereo Kit.

Technical Documentation

  • Description
  • Key Specifications
  • Circuit Topology
  • The Modulus-86 is optimized for ultra-low distortion. The result is a crystal clear and non-fatiguing sound that is revealing without being sterile. Due to the ultra-low noise floor of the Modulus-86, builders experience complete quiet between tracks even with high-sensitivity speakers. 

    Key Features

    • Mono construction: One Modulus-86 board per channel.
    • World class performance ensured by an error correction circuit with local, low-noise power supply regulators.
    • Power supply agnostic by design. High performance is attained with unregulated power supplies and with switch mode supplies.
    • Differential (balanced) input which eliminates hum and ground loop issues. Can be used with single-ended (unbalanced) sources as well.
    • Four-layer PCB optimized for minimum power supply and ground impedance by the use of copper planes and pours. All ground management is handled on the PCB.
    • On-board EMI/RFI input filter and ESD protection.
    • All through-hole construction with socketed ICs. 
    • Bill-of-materials includes a Mouser Electronics Project Link for ease of parts ordering. Parts cost: $50.

    Build difficulty (1-5): 2 (easy-to-moderate)

    All Neurochrome circuit boards are fully electrically tested by the manufacturer. The boards are gold plated, RoHS compatible, and are made in Canada.

    Modulus-86 Build Process

    To get a feel for what is involved in a Modulus-86 build, please view the build video below.

  • The graph below shows the THD+N vs output power for the Modulus-86 Rev. 3.0.

    The table below lists the key specifications for the Modulus-86 Rev. 3.0. For the full specifications, please see the data sheet on the Downloads tab.

    Parameter Value Notes
    Output Power 60 W 4 Ω, < 0.01 % THD+N
    Output Power 40 W 8 Ω, < 0.01 % THD+N
    THD

    -128 dBc

    (0.00004 %)

    40 W, 8 Ω, 1 kHz
    Multi-Tone IMD Residual

    ≤ -140 dB Ref.: 40 W

    AP 32-tone, 40 W, 8 Ω
    Total Integrated Noise and Residual Mains Hum 13.7 µV RMS 20 Hz - 20 kHz, A-weighted
    Gain 20 dB Can be increased by adding a resistor
    DC offset

    ≤ ±0.3 mV

    ≤ ±2.0 mV

    Typical

    Guaranteed by design

    Finished Assembly Dimensions and Weight

    91.2 × 69.7 × 27.5 mm

    90 g

    (W × D × H)

     

    Recommended power supply Power-86 with 2x22 VAC, 160-300 VA power transformer
    All parameters are measured at a supply voltage of ±30 V DC.
  • The block diagram for the Modulus-86 is shown below.

    The Modulus-86 uses one channel of an LM4562 precision audio opamp and an LM3886 power amplifier IC to form a balanced, composite power amplifier. In this configuration the LM4562 is used both to provide error correction for the LM3886 and to provide a balanced input for the composite amp. Another LM4562 completes the front-end of the amplifier.

    The Modulus-86 is power supply agnostic by design. This feature is unique to the Neurochrome Modulus amplifiers. Due to the error correction provided by the Neurochrome composite amplifier topology, the Modulus-86 performs as well on a traditional unregulated linear power supply or a switch mode power supply (SMPS) as it does on a well-regulated laboratory power supply.

    The composite circuit topology also ensures a low DC offset for the Modulus-86. A typical build has less than ±0.3 mV of DC offset. Worst case the DC offset may reach ±2.0 mV. Note that to achieve DC offsets this low, the PCB must be cleaned of flux and other residues after soldering.

    The PCB layout is crucial at the performance levels attained by the Modulus-86. The four-layer PCB employs differential signal routing and carefully designed copper pours and planes to ensure optimal board performance. 

    The Modulus-86 has a gain of +20 dB (10×), which is the lowest gain supported by this circuit. This value was chosen to ensure a good gain structure in the end application. Should a higher gain be needed, it can easily be modified for higher values by adding a resistor. The gain can be increased (within reason) without impacting any of the other performance parameters of the amp.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80056442933

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Z
Verified Purchase
zee
Whiting, US
★★★★★ 5
Great toys for aggressive chewers
Size: Medium/Large, Color: Turkey Day Drumstick - Large
These are great toys they last a while they are destroyed after a while but both dogs are aggressive chewers but they last about a year and a half. And they are go to toys they have one that is a shark mouth and they love it I have bought 4. (two of them the pups lost ).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 20, 2025
A
Verified Purchase
Anjelica
Port Orchard, US
★★★★★ 4
Durable and Fun, Just Gets a Bit Rough
Size: Medium/Large, Color: Chopper - Large
This is a really good toy overall, especially if you have dogs that love to chew. My dogs were immediately into it—they play with it nonstop, toss it around, and stay entertained for a while, which I love. It definitely holds up better than most toys we’ve tried. The only reason I’m giving it 4 stars instead of 5 is because over time it does start to fray a bit and gets a little rough, especially with heavy chewing. It’s not completely indestructible, but it still lasts longer than a lot of other toys. Overall, still a great buy and I would recommend it if your dogs need something tough but fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
L
Verified Purchase
Lina
Bozeman, US
★★★★★ 5
Worthwhile!
Size: Medium/Large, Color: Turkey Day Drumstick - Large
I have a small dog with a really strong bite! Usually have to buy toys that are meant for bigger dogs. This has lasted us for what feels like forever. It does sound very heavy when dropped! My dog loves it though! Would definitely recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
N
Verified Purchase
Natasha M.
Lake Worth, US
★★★★★ 5
Crazy for her iguana!
Size: Medium/Large, Color: Illana the Iguana - Large, Size: Medium/Large, Color: Illana the Iguana - Large
Instant fav for my girl but looks like I'll be replacing often 🤪 she is a super chewer. She loves the soft vs hard combo on toys. Damage in the pic is within 10 mins. 😬😬😬 excellent quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
W
Verified Purchase
War317
San Leandro, US
★★★★★ 3
Foreign body risk for dinosaur dogs
Size: Medium/Large, Color: Dog Ness Monster - Large, Size: Medium/Large, Color: Dog Ness Monster - Large
My dog Bert had foreign body surgery 10 days ago because he swallowed a piece of a toy, so I was looking for something stronger, like for a tyrannosaurus rex. This toy had good reviews, so I bought it for him. In 25 minutes and he'd chomped a chunk of the blue water part off. Bought the toy around 8am, gave it to him around 8pm, and it was in the trash by 8:30pm. This toy is definitely NOT for super chewer tyrannosaurus rex dogs like Bert. But definitely IS a toy that is pretty sturdy and strong for dogs who don't have the bite force of a dinosaur.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026

recommand products