#Libec H35 / RT30B / SP-2B / RC-30

The Libec HS-350 is a professional, high-precision video support system bundle configuration. It couples a fluid pan-and-tilt head with a robust ground-level floor spreader design. This setup is specifically optimized for flat, stable surfaces like studio floors, gymnasiums, and corporate event spaces.

This package provides a highly rigid foundation for mirrorless production kits, medium cinema setups, and handheld broadcast cameras weighing up to seventeen point six pounds or eight kilograms.

Component Breakdown

• H35 Fluid Head: A seventy-five millimeter dual-base fluid head equipped with a flat-base bottom and a half-ball structure. It features a continuous perfect counterbalance system backed by an illuminated visual dial meter on the housing. The internal drag modules offer a free-moving mode plus three independent, step-indexed levels of fluid torque resistance.

• RT30B Tripod Legs: A two-stage, high-rigidity aluminum alloy framing system. Built with premium die-cast leg housings, these legs actively eliminate torsional twisting during high-speed panoramic tracking maneuvers. Leg lock adjustments are handled via heavy-duty rotary clamping levers.

• SP-2B Ground Spreader: A professional floor-level spreader that secures the bottom spikes of the tripod legs into a fixed, structural triangular layout. This ground anchor maximizes lower stability on flat surfaces and prevents the legs from bowing out or marring delicate indoor floors.

• RC-30 Carrying Case: A custom-contoured, water-resistant nylon transport bag. It includes an end-to-end full-zipper closure, dual integrated carry handles, and a shoulder strap to shield the hardware from impacts during travel.

Core System Specifications

Operational System Tips for the HS-350:

💡 The Low-Angle Stance Advantage: Because this bundle utilizes the SP-2B ground spreader instead of a mid-level design, you can achieve significantly lower camera angles. By opening the spreader arms fully and compressing the two-stage aluminum leg extensions completely, you can drop the entire system down to a minimum operating height of just twenty-two inches or fifty-six centimeters from the floor—ideal for low-angle dramatic tracking shots.

• Mastering the Slider Cross-Over: The H35 head features a dual-base design. If you need to transition your camera rig onto a flat production slider or a tabletop dolly midway through a shoot, you do not need to swap heads. Simply unscrew the seventy-five millimeter tie-down knob from beneath the tripod bowl, lift the head out, and use the integrated three eighths inch sixteen female thread on the flat bottom of the head to bolt it directly onto your slider carriage.