Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TAG | Heavy Duty Towbar & Direct Fit Wiring Kit | Mitsubishi Triton MV 2024–On (No Step) | T4C789-K201TAG Heavy Duty Towbar and Direct Fit Wiring Kit (T4C789 K201) This TAG Heavy Duty Towbar and Direct Fit Wiring Kit (T4C789 K201) provides a maximum tow capacity of 3500kg and is designed for the Mitsubishi Triton MV Series Models (2024 On) that **do not** have a rear bumper step fitted. This Kit Includes: TAG Heavy Duty Towbar (T4C789) TAG Direct Fit Wiring Harness (UNT369) 7 Pin Flat Socket TAG Heavy Duty Towbars are designed and manufactured in
TAG Heavy Duty Towbar and Direct Fit Wiring Kit (T4C789-K201)
This TAG Heavy Duty Towbar and Direct Fit Wiring Kit (T4C789-K201) provides a maximum tow capacity of 3500kg and is designed for the Mitsubishi Triton MV Series Models (2024 - On) that **do not** have a rear bumper step fitted.
This Kit Includes:
- TAG Heavy Duty Towbar (T4C789)
- TAG Direct Fit Wiring Harness (UNT369)
- 7 Pin Flat Socket
TAG Heavy Duty Towbars are designed and manufactured in Australia and feature:
- Suits MV Triton Models that do not have a rear bumper step. (Note: If removing step, sensors will need to be relocated.)
- Utilises factory mounting points for ease of fitment
- Durable Powder-coated finish.
- Class 4 Receiver - 50mm x 50mm Hitch
- TAG Limited Lifetime Warranty
- Towbar includes - towball, ball mount, pin & clip and dshackles
Please Note: A towbar is a safety critical item and not always a straightforward fitment due to vehicle manufacturing variation. We strongly recommend you get your towbar and wiring harness installed by a professional towbar or vehicle accessory fitting workshop.
Specifications:
- Wiring Option: Direct Fit ECU
- Diagnostic Coding: Not Required
- Wiring Type: Direct Fit
- Includes Trailer Plug: Yes
- Brake Controller Prep: Yes
- Reed Switch: Normally Open Circuit
- Reverse Sensor Cut Off: Automatic
- Fitting Time [min.]: 45 (UNT369)
- Fitting Time [min.]: 60 (T4C789)
- Ball Weight [kg]: 350
- Towbar Capacity [kg]: 3500
- Bumper Cut Out Required: No
- Bumper Removed During Fitment: No
- Hitch Type: 50mm Square Hitch Receiver
- Exposure: Exposed
- Fits Models With Rear Step: No
- Towbar Class: Heavy Duty
- Coating: Powder Coated
- Tow Ball Mount: L4045
Important Information
- The image shown may not reflect the actual product
- Shipping times may vary depending on destination and stock availability
Vehicle Applications (Full Details)
| Make | Model | Year Start - Year End | Body Type | Engine Details | Drivetrain | Variant |
|---|---|---|---|---|---|---|
| MITSUBISHI | TRITON | 12/2023 - ON | Cab Chassis | 4N16 | 2.4L | Diesel | Automatic 4X4 | GLS, GLX, GLX+, GLR |
| MITSUBISHI | TRITON | 12/2023 - ON | Cab Chassis | 4N16 | 2.4L | Diesel | Automatic/Manual 4X2 | GLX |
| MITSUBISHI | TRITON | 07/2023 - ON | Cab Chassis | 4N16 | 2.4L | Diesel | AWD | DI-D |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Cab Chassis | 4N16 | 2.4L | Diesel | Automatic 4X4 | GLS, GLX, GLX+, GLR |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Cab Chassis | 4N16 | 2.4L | Diesel | Automatic/Manual 4X2 | GLX |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Ute | 4N16 | 2.4L | Diesel | Automatic 4WD | GLS, GLX, GLX+, GLR |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Ute | 4N16 | 2.4L | Diesel | Automatic RWD | GLX |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Ute | 4N16 | 2.4L | Diesel | Automatic 4WD | GLX+ CLUB CAB |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Ute | 4N16 | 2.4L | Diesel | AWD | DI-D |
| MITSUBISHI | TRITON | 01/2024 - 10/2025 | Ute | 4N16 | 2.4L | Diesel | RWD | DI-D |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1372 reviews
Sort
Product Reviews
★★★★★ 5
Works great
Size: 6ft, Color: Silver
Just what I needed for my Dept 56 Christmas display. In past years, it's been a challenge to find enough open plugs for my display. This power strip completely solved that problem. I wish I had found this sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
★★★★★ 4
Better than expected - big office cleanup
Size: 6ft, Color: Yellow, Size: 6ft, Color: Yellow
I got this power strip because it seemed like the most plausible one available, notwithstanding the reviews which particularly complained about it being prone to overheating. I certainly didn't want to burn down my home, so I tested it pretty thoroughly before I got anywhere near installing it.
The power strip arrived exactly as claimed. It is indeed 45 inches long with sixteen outlets. The power cord is substantial-feeling, and feels like it's probably 14 AWG, or possibly #12 (Pic 1), and was the length I expected (6' in my case). The mounting brackets are sufficient to mount the power strip, but only at the ends, and they can't be concealed. This means that things don't end up as solid as one would like, and if you really care about aesthetics you'll end up being offended, but hey this is a power strip, and if you didn't have it the power cord mess would be way uglier.
The outlets themselves are spaced out well enough that there's enough room to put in fairly wide wall wart transformers, but not those which have the plug pins configured such that the transformer has to point sideways. This means that if you want to be able to fill all of the slots, you can only put one of these in, and it has to go at the right-hand end. If you locate it on the left then it covers the switch. In my case, I filled the strip up completely, with one sideways transformer at the right hand end, and I still have many more plugs which won't go, but I've at least managed to improve my cable management a fair bit.
Before I installed it, I tested it by boiling an electric kettle using the outlet which is the farthest from the switch (Pic 2). This is the most stressful way to test things, since is stresses all of the wiring and intermediate outlets before it even gets to the one I was using. The kettle draws 11.6 Amps, so about 1400W (though it's amps that actually matter). I then watched the thermal behaviour of the power strip as it worked. As can be seen the first thermograph, Pic 3, the power strip itself stayed cool, indeed barely above ambient. The power meter and power cord going to the kettle are on the right. Pic 4 shows a detail of the switch end of the power strip. The switch never heated to above 77F, which was again barely above ambient. Pic 5 shows a detail of the power meter shown in Pic 2. As can be easily seen, the power cord for the kettle warms up a bit, reaching 100F, but this is clearly the kettle's power cord and plug warming up, not the power strip itself. Pic 6 shows a detail of the unused outlets on the strip. These all warmed up a little, but never got over 83F. To me, this is negligible.
As a result of this testing, I had no problems with going ahead and installing the power strip. I knew I'd be filling the power strip, but just adding up the devices I planned to plug in (two desktops, four screens, and numerous other devices), I knew that I wouldn't need more than about 4.5 amps, so I have at least 2.6X headroom. Pic 7 shows a part of the power strip as installed - I couldn't get far enough back to show all of it. Pic 8 is a thermograph of the same, with the power strip running across the middle of the picture. The how spots on the power strip are all transformers - clearly not very efficient, but not actually more than warm, and not the power strip's fault. By contrast, the really hot items visible are a DSL router on the far right, and a VOIP phone device lower on the right. Thus, I conclude that there's nothing untoward with the power strip. Lots of the devices I use are inefficient and/or run fairly hot, but if my house burns down, it doesn't look like it's going to be because of this power strip.
All told, this product seems to be very good value for something that actually cleans up my life and has this many outlets. It exceeded my expectations, particularly since my expectations had been lowered by some of the other reviews. It would certainly have been better (for me) had it been longer and with more, and more widely-spaced, outlets, but I can't fault them for making what they made, and their claims seem to have been accurate. Still, the construction is not terribly sturdy and the mounting brackets should have been better thought out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 2, 2026
★★★★★ 5
Plenty of Outlets and Solid Build
Size: 6ft, Color: Silver
I now have way more outlets than I’ll ever need—haha—but that’s not a bad problem to have! This power strip fits neatly behind my TV stand and feels very well made. The spacing between outlets is convenient for larger plugs, and it seems built to last. Overall, a high-quality and practical solution for managing multiple devices.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 13, 2025
★★★★★ 5
Good for dc power supplies
Size: 6ft, Color: Yellow, Size: 6ft, Color: Yellow
The AC outlets are very snug. I’m using this primarily for battery tenders and battery chargers; the outlets are spaced far enough apart to fit the dc power supplies and they stay in place even when mounted horizontally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2025
★★★★★ 5
As good or better than most.
Size: 4ft, Color: Silver
I was very happy with this item. It’s very heavy duty and appears to be something that will last me forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
recommand products
Amity USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Anoka USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Annapolis USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Anguilla USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Americus USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00