AxisFlying ELRS 2.4GHz Radio Receiver

AxisFlying ELRS 2.4GHz Radio ReceiverThe Axisflying 2. 4GHz ELRS receiver is a great pairing with the Thor TX PRO ExpressLRS Transmitter. Using the ESP8285 MCU, SX1280 RF CHIP, and IPEX ports, you can connect external T type antennas for more range, and a stronger signal. The receiver also has a built on Wi Fi antenna for easy updating of firmware via your home Wi Fi network. Check out all our ExpressLRS Collection, Receivers and the rest of our Axisflying Products! Specifications Type:

The Axisflying 2.4GHz ELRS receiver is a great pairing with the Thor TX PRO ExpressLRS Transmitter. Using the ESP8285 MCU, SX1280 RF CHIP, and IPEX ports, you can connect external T-type antennas for more range, and a stronger signal. The receiver also has a built on Wi-Fi antenna for easy updating of firmware via your home Wi-Fi network. 

Check out all our ExpressLRS Collection,  Receivers and the rest of our Axisflying Products!

Specifications

• Type: ISM
  
• MUC: ESP8285
  
• RF Module: SX1280IMLTRT
  
• Antenna Connector: IPEX
• Frequency Range: 2400 MHz to 2500 MHz
  
• Maximum Receive Refresh Rate: 500Hz
  
• Minimum Receiver Refresh Rate: 25Hz
  
• Reciever Protocol: CRSF
• Working Voltage: 5V
• Dimension: 18.2x11.75x3mm
• Weight: 0.8g(Reciever only), 2.4g (W/ Antenna)

Receiver Wiring Pinout

• Receiver RX — FC UART_TX  for Telemetry
• Receiver TX — FC UART_RX  for Control
• Receiver 5V — FC 5V or 4v5
• Receiver G — FC GND
• Receiver protocol: Serial-based receiver – CRSF

Includes

• 1 x Axisflying ELRS 2.4GHz Radio Receiver
• 1 x 2.4Ghz T-Antenna
• 1 x Silicone Wiring
• 1 x Heat Shrink