Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kawasaki COVER-MUFFLER16146-2130A missing or damaged muffler cover is a burn hazard this genuine OEM heat shield restores the critical thermal barrier your equipment requires. Compatibility FC series (verify your model number before purchasing) FH series FJ series Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants. Part Details OEM Part
A missing or damaged muffler cover is a burn hazard — this genuine OEM heat shield restores the critical thermal barrier your equipment requires.
✅ Compatibility
- FC series (verify your model number before purchasing)
- FH series
- FJ series
⚠️ Important: Always verify your exact engine model number and serial number before purchasing. Kawasaki engine series share many part numbers but not all parts are interchangeable between variants.
🛠️ Part Details
- OEM Part Number: 16146-2130
- Replaces: Verify with your Kawasaki dealer or engine manual
- Brand: Kawasaki — Genuine OEM
- Type: Original Equipment Manufacturer (OEM) replacement
⭐ Key Features
- OEM-spec stamped steel construction for maximum heat deflection
- Correct mounting points for secure, rattle-free installation
- Designed to direct heat away from operator and fuel system components
- Rust-resistant coating for extended service life
- Direct bolt-on replacement — no modifications required
🔧 What Problem This Solves
- Risk of operator burns from exposed hot muffler surface
- Heat damage to adjacent fuel lines, plastic components or wiring
- Rattling from cracked or loose original heat shield
- Safety compliance failure on commercial equipment
📏 Specifications
- Part Name: Muffler Heat Shield
- Material: Stamped steel with heat-resistant coating
- Manufacturer: Kawasaki
- Condition: New — Genuine OEM
🔨 Installation
- Difficulty: Easy
- Tools Required: Screwdriver, 8mm or 10mm wrench
- Estimated Time: 10–20 minutes
- Tip: Always consult your Kawasaki engine service manual for torque specifications and step-by-step procedures.
💪 Why Choose This Part
OEM shields are shaped precisely for your engine's exhaust layout — generic alternatives often miss critical coverage areas.
🛒 Order With Confidence
✓ Genuine OEM — Guaranteed Fit — This is a genuine Kawasaki OEM part backed by the manufacturer's quality guarantee. If you have any questions about compatibility, provide your engine model and serial number and our team will confirm fitment before you purchase.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 1081 reviews
Sort
Product Reviews
★★★★★ 5
Use
Extremely easy to use
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 10, 2026
★★★★★ 5
Hides the cables
Size: 36", Size: 36"
Hides the cables. A little expensive but works well. When drilling the holes, be sure to be mindful of the overhang of the net compared to the brackets and the paper template.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 1, 2025
★★★★★ 5
Perfect for cable management
Size: 36", Size: 36"
I installed this on my uplift desk and didn’t have to drill any holes. I just used velcro ties on the support beams and it is holding steady. I have about 8 pounds in the mesh holder and the wire management for it is great. Easy to install and functions perfectly
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
★★★★★ 5
Durable, easy to install, and gets the job done!
Size: 36", Size: 36"
I picked this up since upgrading my desk setup, and was wanting a cleaner, more managed approach to the cables mounted under my desk. Starting with quality, the mesh net is quite strong and can handle putting all kinds of cables and power strips to you liking without worrying about any thing tearing-- it won't even come close, so don't worry. The kit has everything you need to get started: The mesh net, metal pipes to run along the sides, and two mounting brackets to hook those metal pipes onto. On top of that, the product page has a video demo, which is going to do a much better job showing/explaining than I will, so I'd take a look at that if you just picked this up for installation.
The net really gets the job done, and I'm happy to give it a 5-star rating for its value, size, functionality, and doing everything it advertised on the page. However, I will add a caveat for those looking for exceptionally clean/low-profile cable management for their desk. The mounting kit was nice to come with a template for you to drill the hooks onto as intended by the manufacturer. However, at this particular width, the net will naturally hang down about 2-3 inches. When looking at a desk from the front, you will still be able to see the net hanging, unless you have a particularly deep desk, or something occluding it. That's not by any means a dealbreaker, but I'd recommend one of two things:
- VIVO should consider adding a second mounting template that's wider and pulls the net closer to the table
- You can use any drillable hook you might have lying around to add a wider mounting point for the net to be more flush with the desk.
Either way, I'm still really happy with the product, and the suggestions above might let you get even more out of it if you're OCD about your cables like I am. All in all, it's a great looking solution for your desk!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025
★★★★★ 4
Good hanger, could be taller for bigger gap
Size: 36"
Pretty good, wish it was taller
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 9, 2025
recommand products
Shrimp, Miso Seasoned 5oz, with Spinach and 1/3rd Cup Cranberry Almond Quinoa + Avocado
23.95
Shrimp, Blacken Seasoned 4oz, with Green Beans and 1/3rd Cup Cranberry Almond Quinoa + Avocado
20.45
Shrimp, Blacken Seasoned 8oz, with Green Beans and 1/3rd Cup Cranberry Almond Quinoa + Avocado
28.45
Shrimp, Miso Seasoned 8oz, with Broccoli and 1/3rd Cup Cranberry Almond Quinoa + Avocado
28.45
Shrimp, Plain 10oz, with Asparagus and 1/3rd Cup Cranberry Almond Quinoa + Avocado
33.95